LastMeasure
Overview
What is LastMeasure?
LastMeasure is a software toolbox which is specialized for shoe lasts.
LastMeasure simplifies a variety of operations related to shoe lasts.
By using INFOOT, users can scan shoe lasts on LastMeasure.
LastMeasure can digitalize the actual shoe lasts,
so it can help users reduce the stock of shoe lasts.
Some of the operations with shoe lasts such as scanning, obtaining feather-edge, splitting
upper and bottom of the last can be bothersome if you use one of the prevalent CAD software.
Generated data can be exported as STL or OBJ and managed in the database in LastMeasure.
Function
- Scanning shoe lasts by INFOOT or loading CAD data created by the other CAD software.
- Generating data such as feather edge and splitting the upper and the bottom of a shoe last.
- Managing data in LastMeasure database and export in CAD formats.
- Quantifying the measurements of shoe lasts by Kagami-Method Plugin for LastMeasure
note On Kagami-Method, please visit Kagami-Method School
Detail
Obtaining shoe last shape/measurements
Shoe lasts can be scanned on LastMeasure by using INFOOT.
Accurately obtaining each measurements and shape of shoe lasts
such as the bottom length and circumference.
If you have CAD data of shoe lasts, it is also possible to load to LastMeasure.
Generating feather edge
Most of shoe lasts have feather edge, a part of a shoe last
which separate the upper and the bottom of shoe lasts.
However, it is difficult for optical laser scanning systems,
including INFOOT, to capture the part as sharp as it is.
LastMeasure can recover the feather edge and generate line data from it, irrespective of whether it is data scanned by INFOOT or the other scanners.
Splitting Upper/Bottom
LastMeasure can separate the upper and bottom of a shoe last and generate mesh data from these respectively.
Generating Insole Base
Insole base, whose bottom is flat, can be generated from shoe last data
and it can be used for generating insole data.
Generated insole base can be used in InsoleEditor
to generate insole data which fit on a given shoe shape.
Database
Exporting Data
Measuremnet data is exported as CSV file.
Comparison between foot and a shoe last
This function enables users to visually compare shoe lasts with foot.
Kagami-Method Plugin
Thanks to this function, shoe last measurements can be quantitatively described or compared.
Also, by using Kagami-Method Plugin for Diplus, the relation between foot and a shoe last can be described quantitatively.
Specification
PC | PC/AT compatible PC with USB2.0 Interface |
OS | Microsoft Windows 7, 8, 10 |
CPU | x86 compatible 1.6GHz or more (Multi-core CPU recommended) |
RAM | 2GB or more |
Graphics | Corresponds to the OpencGL the graphic card |
HDD | For software installation being less crowded above 20MB necessity. |